TIMKEN Bearing 14126D - 14272

TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Material: Bearing steels
In Stock:
Photo may not represent actual item. See the technical specification for details.

Specifications of TIMKEN Bearing 14126D - 14272

TIMKEN Bearing 14126D - 14272

Specifications

Series

14000

Cone Part Number

14126D

Cup Part Number

14272

Design Unit

Inch

Bearing Weight

0.9 lb0.4 Kg

Cage Material

Stamped Steel

Dimensions

d – Bore

1.25 in31.75 mm

D – Cup Outer Diameter

2.717 in69.012 mm

B – Double Cone Width

1.5426 in39.182 mm

C – Cup Width

0.5625 in14.288 mm

T – Bearing Width across Cups

1.5005 in38.113 mm

Abutment and Fillet Dimensions

R – Cone Backface “To Clear” Radius1

0.06 in1.5 mm

r – Cup Backface “To Clear” Radius2

0.130 in3.3 mm

da – Cone Frontface Backing Diameter

1.57 in40 mm

Db – Cup Backface Backing Diameter

2.32 in58.93 mm

Ab – Cage-Cone Frontface Clearance

0.07 in1.8 mm

Basic Load Ratings

C90 – Dynamic Radial Rating (One-Row, 90 million revolutions)3

3180 lbf14200 N

C1 – Dynamic Radial Rating (Two-Row, 1 million revolutions)4

21400 lbf95100 N

C90(2) – Dynamic Radial Rating (Two-Row, 90 million revolutions)5

5540 lbf24600 N

Ca90 – Dynamic Thrust Rating (90 million revolutions)6

2080 lbf9260 N

Factors

K – Factor7

1.53

e – ISO Factor8

0.38

Y1 – ISO Factor9

1.77

Y2 – ISO Factor10

2.63

G1 – Heat Generation Factor (Roller-Raceway)

18

G2 – Heat Generation Factor (Rib-Roller End)

9.4

Cg – Geometry Factor11

0.0668

Spacer

Note

Spacer shows standard nominal .01 radii, actual bearing may vary

Product description of TIMKEN Bearing 14126D - 14272

TIMKEN Bearing 14126D - 14272,Tapered Roller Bearings TDI (Tapered Double Inner) Imperial. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most unforgiving conditions.Double- or two-row Timken® tapered roller bearings feature double cups and two single cones. They are available in a variety of configurations for general industrial and automotive applications. And related type you may also like TIMKEN Bearing 14126D - 14273.

TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.

TDI bearings are sometimes used on rotating shaft applications where a loose fit is required for ease of removal.

Size range:
ID 25.400 mm to 1200.150 mm (1.000 in. to 47.2500 in.)
OD 30.480 mm to 2460.000 mm (1.2000 in. to 96.8504 in.)

Design Attributes:
Double cone and two single cups, with or without a cup spacer.
Furnished as a matched assembly.
Cups ground to fit.

Applications:
Gear reduction units
Cranes
Calendar rolls
Industrial machinery

TIMKEN Bearing 14126D - 14272,Tapered Roller Bearings TDI (Tapered Double Inner) Imperial. A tapered roller bearing includes a retainer formed with a plurality of trapezoidal pockets. Each pocket includes cutouts formed in the crossbars defining each pocket near the narrow end thereof. A tapered roller is received in each pocket with its small-diameter end facing the narrow end of the pocket. Lubricating oil flowing into the bearing space defined radially inwardly of the retainer can quickly flows through the cutouts into the bearing space defined radially outwardly of the retainer at the narrow end of each pocket. Thus, it is possible to reduce the amount of lubricating oil flowing along the raceway of the inner ring to the large-diameter flange, and thus reduce the amount of lubricating oil remaining in the bearing, thereby reducing the torque loss due to rotational resistance of the bearing resulting from lubricating oil remaining in the bearing.

We are looking for partners and friends,Not only business!

if you need more details,feel free to contact us, e-mail us at [email protected]

Literature & catalogs

TIMKEN -LUBRICATION
Download
TIMKEN -TYPE- TDI
Download
TIMKEN-TAPERED ROLLER BEARING CAGES
Download
TIMKEN-TYPE- TS
Download

Videos

TIMKEN

Timken Tricks of the Trade – Installing a Timken® Set Right® Bearing

Timken Stronger By Design

Timken Tricks of the Trade Wheel End Bearing Removal Tips