SKF Bearing C 4026-2CS5V/C3GEM9

V: Full complement bearing
C3: Internal clearance greater than Normal
F9: Special grease fill, the one-digit number indicates the non-standard filling degree from smaller (1) to larger (9)
GEM: High temperature grease with EP additives (SKF LGHB 2)
d=130.0mm, D=200.0mm, B=69.0mm, Mass bearing=7.5kg
Material: Bearing steels
In Stock:
Photo may not represent actual item. See the technical specification for details.

Specifications of SKF Bearing C 4026-2CS5V/C3GEM9

SKF Bearing C 4026-2CS5V/C3GEM9

Dimensions

d 130.0mm Bore diameter
D 200.0mm Outside diameter
B 69.0mm Width
d2 152.0mm Shoulder diameter of inner ring
D1 183.0mm Shoulder or recess diameter of outer ring
s2 8.4mm Permissible axial displacement
r1,2 2.0mm Chamfer dimension
SKF Bearing C 4026-2CS5V/C3GEM9

Abutment dimensions

da 140.0mm Diameter of shaft abutment
da 152.0mm Diameter of shaft abutment
Da 154.0mm Diameter of housing abutment
Da 190.0mm Abutment diameter housing
ra 2.0mm Radius of fillet

Calculation data

Basic dynamic load rating C 550.0kN
Basic static load rating C0 830.0kN
Fatigue load limit Pu 83.0kN
Limiting speed 70.0r/min
Misalignment factor k1 0.089
Internal clearance factor k2 0.133

Mass

Mass 7.5kg

Product description of SKF Bearing C 4026-2CS5V/C3GEM9

SKF Bearing C 4026-2CS5V/C3GEM9, it belongs to SKF Bearing > Rolling bearings > Roller bearings > CARB toroidal roller bearings. CARB toroidal roller bearings are unique: as well as accommodating misalignment without increased stress levels, they also provide friction-less axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. They can accommodate higher load levels and provide significantly extended service life.
SKF Bearing C 4026-2CS5V/C3GEM9, The SKF standard assortment of CARB toroidal roller bearings matches the assortment of spherical roller bearings. It also includes bearings with a low cross-sectional height to meet requirements for minimum radial space. All CARB bearings are upgraded SKF Explorer bearings and are shown coloured blue in the product table. The standard assortment includes:
basic design bearings with cylindrical or tapered bore
taper 1:12 (designation suffix K)
taper 1:30 (designation suffix K30)
sealed bearings

SKF Bearing C 4026-2CS5V/C3GEM9, Depending on their series and size the following open CARB thyroidal roller bearings are available as standard:
bearings with a roller centred cage
bearings with an inner ring centred cage
full complement bearings with a retaining ring
The load carrying capacity of full complement CARB bearings is considerably higher than that of same-sized bearings with a cage.
are available, as standard, as small and medium-size full complement bearings with a cylindrical bore
are typically used for low speeds and very heavy loads
are suitable for both inner or outer ring rotation
are fitted with a double-lip contact seal on one or both sides in a recess on the outer ring, sealing against the inner ring raceway

are available with two different seal materials / designs:
sheet steel reinforced HNBR
sheet steel reinforced NBR with enhanced sealing effectiveness - mainly intended for oscillating or very low speed applications

Bearings sealed on both sides are lubricated for the life of the bearing and are virtually maintenance-free. They are filled with one of the following greases:
bearings with HNBR seals → SKF LGHB 2 grease as standard
bearings with NBR seals → SKF LGEP 2 grease as standard
other SKF greases on request

CARB bearings, if not full a complement of rollers, are fitted with one of the following cages:
glass fibre reinforced PA46 cage, window-type, roller centred (designation suffix TN9)
stamped steel cage, window-type, roller centred (no designation suffix)
machined brass cage, window-type, roller centred (designation suffix M)
machined brass cage, inner ring centred (designation suffix MB)
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.

SKF can customize bearings to meet the needs of applications where the bearings are subjected to unique operating conditions. For example, bearings for:
paper mills or coasters in high precision execution
very arduous operating conditions, e.g. continuous casters
high temperature applications

For additional information about application-specific CARB bearings, contact the SKF application engineering service.

You may also like SKF Bearing C 4028 K30V

We are looking for partners and friends,Not only business!

if you need more details,feel free to contact us, e-mail us at [email protected]

Literature & catalogs

SKF-Angular contact ball bearings
Download
SKF-Self-aligning ball bearings
Download
SKF-Spherical roller bearings
Download
SKF-Thrust bearings
Download

Videos

SKF-bearing

SKF Cylindrical roller bearings

SKF USA Bearing Remanufacturing Services

SKF Tapered Roller Bearings Mounting and dismounting