NSK Bearing 135

Photo may not represent actual item. See the technical specification for details.

Specifications of NSK Bearing 135

Boundary Dimensions
(mm)
Basic Load Ratings
(N)
Limiting Speeds
(min-1)
Bearing Numbers
d
D
B
r
min.
Cr
C0r
Grease
Oil
5 19 6 0.3 2.53 0.475 30,000 36,000 135   CAD  
NSK Bearing 135

Product description of NSK Bearing 135

NSK Bearing 135 This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.

However, depending on the surrounding structure, such an angle may not be possible.

NSK Bearing 135 In the self-aligning ball bearing, two rows of rolling elements are supported in two raceway grooves in the inner ring. The raceway on the outer ring has a curved form. The cage combines the two rows of balls and the inner ring to form a unit that can align itself by swivel-ling relative to the outer ring.

Due to the curved raceway on the outer ring, self-aligning ball bearings are tolerant of misalignment between the shaft and housing and deflections of the shaft. They can thus compensate static and dynamic angular defects within certain angular limits in a rotating shaft system.

NSK Bearing 135 They are used particularly in sectors such as agricultural machinery, conveying equipment, simple woodworking machinery and ventilators.

Self-aligning ball bearings are better suited to higher speeds on account of their point contact, than barrel roller bearings with line contact. The bearings run more quietly and at lower temperatures than bearings with comparable specified characteristics. Self-aligning ball bearings are particularly suitable: if there is skewing between the outer and inner ring (for the compensation of angular misalignment) for bearing arrangements with high radial loads for higher speeds on account of their point contact, than barrel roller bearings with line contact where bearings with the above-mentioned characteristics are expected to run more quietly and at lower temperatures, even at high speeds

Literature & catalogs

Introduction to Revised NSK Rolling Bearing Catalog
Download
NSK precision angular contact ball bearings
Download
NSK-Railway Rolling Stock Bearings
Download
NSK-TAPERED ROLLER BEARINGS
Download

Videos

NSK bearing

NSK Cylindrical Roller Bearings

NSK in Motion Overview of NSK's Industrial Machinery Businesss