Specifications of FAG Bearing HCS71908-E-T-P4S-UL
![FAG Bearing HCS71908-E-T-P4S-UL](https://cdn.schaeffler-ecommerce.com/cdn/0000A2FC_a.png)
![FAG Bearing HCS71908-E-T-P4S-UL](https://cdn.schaeffler-ecommerce.com/cdn/0000A2FE_a.png)
![FAG Bearing HCS71908-E-T-P4S-UL](https://cdn.schaeffler-ecommerce.com/cdn/0000A300_a.png)
Additional information
ca H | 127 N/μm | Axial rigidity heavy |
ca L | 66.4 N/μm | Axial rigidity light |
ca M | 98 N/μm | Axial rigidity medium |
KaE H | 484 N | Lift-off force heavy |
KaE L | 78 N | Lift-off force light |
KaE M | 238 N | Lift-off force medium |
FV H | 164 N | Preload force heavy |
FV L | 27 N | Preload force light |
FV M | 82 N | Preload force medium |
Main Dimensions & Performance Data
Cr | 6400 N | Basic dynamic load rating, radial |
C0r | 3900 N | Basic static load rating, radial |
d | 40 mm | Bore diameter |
Cur | 315 N | Fatigue load limit, radial |
nG Grease | 36000 1/min | Limiting speed for grease lubrication |
D | 62 mm | Outside diameter |
B | 12 mm | Width |
Dimensions
α | 25 ° | Contact-angle |
r1 min | 0.6 mm | Minimum chamfer dimension |
rmin | 0.6 mm | Minimum chamfer dimension |
Mounting dimensions
da | h12 | Diameter shaft shoulder clearance |
da | 45 mm | Diameter shaft shoulder |
a | 17.9 mm | Distance between the apexes of the pressure cones |
ra max | 0.6 mm | Maximum recess radius |
ra1 max | 0.15 mm | Maximum recess radius |
Da | H12 | Shoulder diameter outer ring clearance |
Da | 58.5 mm | Shoulder diameter outer ring |
Temperature range
Tmax | 80 ℃ | Operating temperature max. |
Tmin | -30 ℃ | Operating temperature min. |