Specifications of FAG Bearing B7204-C-T-P4S-UL
![FAG Bearing B7204-C-T-P4S-UL](https://cdn.schaeffler-ecommerce.com/cdn/0000A051_a.png)
![FAG Bearing B7204-C-T-P4S-UL](https://cdn.schaeffler-ecommerce.com/cdn/000B017F_a.png)
![FAG Bearing B7204-C-T-P4S-UL](https://cdn.schaeffler-ecommerce.com/cdn/0000A074_a.png)
Additional information
ca H | 71.1 N/μm | Axial rigidity heavy |
ca L | 28.1 N/μm | Axial rigidity light |
ca M | 49.3 N/μm | Axial rigidity medium |
KaE H | 1828 N | Lift-off force heavy |
KaE L | 234 N | Lift-off force light |
KaE M | 851 N | Lift-off force medium |
FV H | 496 N | Preload force heavy |
FV L | 75 N | Preload force light |
FV M | 248 N | Preload force medium |
Main Dimensions & Performance Data
Cr | 17200 N | Basic dynamic load rating, radial |
C0r | 8000 N | Basic static load rating, radial |
d | 20 mm | Bore diameter |
Cur | 850 N | Fatigue load limit, radial |
nG Grease | 32000 1/min | Limiting speed for grease lubrication |
nG Oil | 48000 1/min | Limiting speed for oil lubrication |
D | 47 mm | Outside diameter |
B | 14 mm | Width |
Dimensions
α | 15 ° | Contact-angle |
r1 min | 1 mm | Minimum chamfer dimension |
rmin | 1 mm | Minimum chamfer dimension |
Mounting dimensions
da | h12 | Diameter shaft shoulder clearance |
da | 26.5 mm | Diameter shaft shoulder |
a | 11.5 mm | Distance between the apexes of the pressure cones |
Etk max | 31.7 mm | Maximum diameter injection pitch |
Etk1 max | 31.7 mm | Maximum diameter injection pitch |
ra max | 1 mm | Maximum recess radius |
ra1 max | 0.3 mm | Maximum recess radius |
Etk min | 29.6 mm | Minimum diameter injection pitch |
Etk1 min | 29.6 mm | Minimum diameter injection pitch |
Da | H12 | Shoulder diameter outer ring clearance |
Da | 40.5 mm | Shoulder diameter outer ring |
Temperature range
Tmax | 100 ℃ | Operating temperature max. |
Tmin | -30 ℃ | Operating temperature min. |