Specifications of SKF Bearing 32248
| Dimension series | 4GD |
Dimensions
| d | 240.0mm | Bore diameter |
| D | 440.0mm | Outside diameter |
| T | 127.0mm | Total width |
| d1 | 346.3mm | Shoulder diameter of inner ring |
| B | 120.0mm | Width of inner ring |
| C | 100.0mm | Width of outer ring |
| r1,2 | 5.0mm | Chamfer dimension of inner ring |
| r3,4 | 4.0mm | Chamfer dimension of outer ring |
| a | 105.0mm | Distance side face to pressure point |
Abutment dimensions
| da | 276.0mm | Diameter of shaft abutment |
| db | 262.0mm | Diameter of shaft abutment |
| Da | 365.0mm | Diameter of housing abutment |
| Da | 420.0mm | Diameter of housing abutment |
| Db | 415.0mm | Diameter of housing abutment |
| Ca | 7.0mm | Minimum width of space required in housing on large side face |
| Cb | 27.0mm | Minimum width of space required in housing on small side face |
| ra | 4.0mm | Radius of shaft fillet |
| rb | 3.0mm | Radius of housing fillet |
Calculation data
| Basic dynamic load rating | C | 1918.0kN |
| Basic static load rating | C0 | 3350.0kN |
| Fatigue load limit | Pu | 270.0kN |
| Reference speed | 1000.0r/min | |
| Limiting speed | 1300.0r/min | |
| Limiting value | e | 0.43 |
| Axial load factor | Y | 1.4 |
| Axial load factor | Y0 | 0.8 |
Mass
| Mass | 81.5kg |
