Specifications of SKF Bearing HM 231132/110
| Dimension series | HM 231100 |
Dimensions
| d | 139.7mm | Bore diameter |
| D | 236.538mm | Outside diameter |
| T | 57.15mm | Total width |
| d1 | 187.2mm | Shoulder diameter of inner ring |
| B | 56.642mm | Width of inner ring |
| C | 44.45mm | Width of outer ring |
| r1,2 | 3.5mm | Chamfer dimension of inner ring |
| r3,4 | 3.3mm | Chamfer dimension of outer ring |
| a | 44.806mm | Distance side face to pressure point |
Abutment dimensions
| da | 165.0mm | Diameter of shaft abutment |
| db | 155.5mm | Diameter of shaft abutment |
| Da | 210.0mm | Diameter of housing abutment |
| Da | 222.5mm | Diameter of housing abutment |
| Db | 223.0mm | Diameter of housing abutment |
| Ca | 9.0mm | Minimum width of space required in housing on large side face |
| Cb | 12.5mm | Minimum width of space required in housing on small side face |
| ra | 3.5mm | Radius of shaft fillet |
| rb | 3.3mm | Radius of housing fillet |
Calculation data
| Basic dynamic load rating | C | 629.0kN |
| Basic static load rating | C0 | 850.0kN |
| Fatigue load limit | Pu | 86.5kN |
| Reference speed | 2200.0r/min | |
| Limiting speed | 2600.0r/min | |
| Limiting value | e | 0.31 |
| Axial load factor | Y | 1.9 |
| Axial load factor | Y0 | 1.1 |
Mass
| Mass | 10.1kg |
