Specifications of SKF Bearing LM 48548 A/510
| Dimension series | LM 48500 |
Dimensions
| d | 34.925mm | Bore diameter |
| D | 65.088mm | Outside diameter |
| T | 18.034mm | Total width |
| d1 | 50.0mm | Shoulder diameter of inner ring |
| B | 18.288mm | Width of inner ring |
| C | 13.97mm | Width of outer ring |
| r1,2 | 0.8mm | Chamfer dimension of inner ring |
| r3,4 | 1.3mm | Chamfer dimension of outer ring |
| a | 14.025mm | Distance side face to pressure point |
Abutment dimensions
| da | 42.0mm | Diameter of shaft abutment |
| db | 41.5mm | Diameter of shaft abutment |
| Da | 57.0mm | Diameter of housing abutment |
| Da | 58.5mm | Diameter of housing abutment |
| Db | 61.0mm | Diameter of housing abutment |
| Ca | 3.0mm | Minimum width of space required in housing on large side face |
| Cb | 4.0mm | Minimum width of space required in housing on small side face |
| ra | 0.8mm | Radius of shaft fillet |
| rb | 1.3mm | Radius of housing fillet |
Calculation data
| Basic dynamic load rating | C | 58.0kN |
| Basic static load rating | C0 | 57.0kN |
| Fatigue load limit | Pu | 6.2kN |
| Reference speed | 8500.0r/min | |
| Limiting speed | 10000.0r/min | |
| Limiting value | e | 0.37 |
| Axial load factor | Y | 1.6 |
| Axial load factor | Y0 | 0.9 |
Mass
| Mass | 0.26kg |
