Specifications of NSK Bearing 24164CAMK30E4
|
|
|
|
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||
| 320 | 540 | 218 | 5 | 4,400 | 6,650 | 500 | 1,100 | 480 | 600 | 24164CAMK30E4 |  |
 |
|||||||||||||||||
NSK Bearing 24164CAMK30E4
d=320 mm, B=218 mm, D=540 mm, Mass=196 kg
Material: Bearing steels
EMAIL: [email protected]
In Stock:
Photo may not represent actual item. See the technical specification for details.
Product description of NSK Bearing 24164CAMK30E4
NSK Bearing 24164CAMK30E4 in bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds.There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or absence of side ribs).The outer and inner rings of all types are separable.Some cylindrical roller bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other. These can be used as free-end bearings.
NSK Bearing 24164CAMK30E4 Cylindrical roller bearings, in which either the inner or outer rings has two ribs and the other ring has one, are capable of taking some axial load in one direction Double-row cylindrical roller bearings have high radial rigidity and are used primarily for precision machine tools.Pressed steel or machined brass cages are generally used, but sometimes molded polyamide cages are also used.Depending on the existence of ribs on their rings NSK Bearing 24164CAMK30E4 Cylindrical Roller Bearings are classified into the following types:
Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings.
NH-type cylindrical roller bearings consist of the NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars.
The inner ring loose rib of an NUP-type cylindrical roller bearing should be mounted so that the marked side is on the outside.
Shown in the figures, types EA, C, CD, CA, which are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type CA has machined brass cages. Type EA has especially high load capacity, features low torque, and has a high-strength cage.
An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed with E4.
To use bearings with oil grooves and holes, it is recommended to provide an oil groove in the housing bore, since the depth of the groove in the bearing is limited.
