Specifications of FAG Bearing 32213-H
Main Dimensions & Performance Data
Cr | 148000 N | Basic dynamic load rating, radial |
C0r | 200000 N | Basic static load rating, radial |
d | 65 mm | Bore diameter |
Cur | 25000 N | Fatigue load limit, radial |
nG | 4720 1/min | Limiting speed |
D | 120 mm | Outside diameter |
nδr | 3600 1/min | Thermal speed rating |
B | 31 mm | Width, inner ring |
C | 27 mm | Width, outer ring |
T | 32.75 mm | Width, total |
Additional information
Dimensions
a | 27 mm | Distance between the apexes of the pressure cones |
d1 | 93.3 mm | Guidance rib diameter of inner ring |
r1, 2 min | 2 mm | Minimum chamfer dimension of inner ring back face |
r3, 4 min | 1.5 mm | Minimum chamfer dimension of outer ring back face |
Calculation factors
Y | 1.48 | Dynamic axial load factor |
e | 0.4 | Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y |
Y0 | 0.81 | Static axial load factor |
Mounting dimensions
Da max | 111 mm | Maximum diameter of housing shoulder |
da max | 76 mm | Maximum diameter of shaft shoulder |
rb max | 1.5 mm | Maximum fillet radius of housing |
ra max | 2 mm | Maximum fillet radius of shaft |
Da min | 104 mm | Minimum diameter of housing shoulder |
Db min | 115 mm | Minimum diameter of housing shoulder |
db min | 74 mm | Minimum diameter of shaft shoulder |
Ca min | 4 mm | Minimum axial space |
Cb min | 5.5 mm | Minimum axial space |
Temperature range
Tmax | 120 ℃ | Operating temperature max. |
Tmin | -30 ℃ | Operating temperature min. |