TIMKEN Bearing 24144EJW33

Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Material: Bearing steels
In Stock:
Photo may not represent actual item. See the technical specification for details.

Specifications of TIMKEN Bearing 24144EJW33

TIMKEN Bearing 24144EJW33


UPC Code


Design Unit


d – Bore

220 mm

Cage Type


Cage Material


Superseded Part



D – Outer Diameter

370 mm14.5669 in

B” – Inner Ring Width

150 mm5.9055 in

B – Outer Ring Width

150 mm5.9055 in

Abutment and Fillet Dimensions

R – Inner Ring “To Clear” Radius1

3 mm0.120 in

r – Outer Ring “To Clear” Radius2

3.0 mm0.12 in

da – Inner Ring Backing Diameter

248.000 mm9.8000 in

Da – Outer Ring Backing Diameter

337 mm13.3000 in

Basic Load Ratings

C0 – Static Radial Rating

3220000 N725000 lbf

C1(2) – Dynamic Radial Rating (Two-Rows)

2250000 N505000 lbf


e – ISO Factor3


Y0 – ISO Factor4


Y1 – ISO Factor5


Y2 – ISO Factor6


Reference Thermal Speed Rating (Grease)

720 rpm

Reference Thermal Speed Rating (Oil)7

780 rpm

Cg – Geometry Factor8


Product description of TIMKEN Bearing 24144EJW33

TIMKEN Bearing 24144EJW33, It belongs to TIMKEN Bearing > Spherical Roller Bearings > Spherical Roller Bearings - Steel Cage.

and related type you may also like TIMKEN Bearing 24144EJW33C2.

Misalignment. Contamination. High temperatures. Even extreme speeds or critical stresses can present extra challenges when managing high radial loads. Timken® spherical roller bearings can handle it all, with innovations designed to extend bearing life and boost reliability.

Timken® Spherical Roller Bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. TIMKEN Bearing 24144EJW33,Timken® Spherical Roller Bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.

Cages (also referred to as rolling element retainers) serve several purposes in the proper operation of a rolling element bearing. Cages separate the rolling elements and prevent rolling element on rolling element contact and wear. Cages align the rolling elements on the inner ring to prevent rolling element sliding, skidding, and skewing to facilitate true rolling motion. For handling purposes, cages retain the rolling elements on the inner ring assembly to allow for bearing installation. In some instances, cages also improve flow of the lubricant to the bearing inner ring raceways. The following sections discuss the common types of cages used for spherical roller bearings. The basic design geometry, material, and manufacture are discussed for each cage type.

TIMKEN Bearing 24144EJW33,Timken® EJ bearings incorporate a unique stamped-steel cage design as shown in next. The EJ design includes two independent cages, one for each row of rollers, which are assembled into an individual bearing. This feature allows each path of cage and rollers to operate independently, and prevents the cage from bending. This cage is guided on the inner ring and runs above pitch. Each cage is surface hardened (nitrided) to provide improved wear resistance as well as additional strength to allow the bearing to operate in even the most severe environment. Face slots have been designed for improved lubrication flow. This can result in a lower operating temperature and longer bearing life.

We are looking for partners and friends,Not only business!

if you need more details,feel free to contact us, e-mail us at [email protected]

Literature & catalogs




Timken Tricks of the Trade – Installing a Timken® Set Right® Bearing

Timken Stronger By Design

Timken Tricks of the Trade Wheel End Bearing Removal Tips