Specifications of SKF Bearing 6210 NR
Dimensions
d | 50.0mm | Bore diameter |
D | 90.0mm | Outside diameter |
B | 20.0mm | Width |
d1 | 62.51mm | Shoulder diameter |
D2 | 81.61mm | Recess diameter |
D3 | 86.79mm | Diameter of snap ring groove |
D4 | 96.5mm | Outside diameter of snap ring |
b | 2.7mm | Width of snap ring groove |
C | 3.28mm | Distance outer ring from side face to snap ring groove |
f | 2.46mm | Width of snap ring |
r0 | 0.6mm | Bottom radius of snap ring groove |
r1,2 | 1.1mm | Chamfer dimension |
Abutment dimensions
da | 57.0mm | Diameter of shaft abutment |
Da | 83.0mm | Diameter of housing abutment |
Db | 98.0mm | Diameter of snap ring recess in the housing |
ba | 3.0mm | Width of snap ring recess in the housing |
Ca | 5.74mm | Distance from outer ring side face to snap ring back face |
ra | 1.0mm | Radius of shaft or housing fillet |
Calculation data
Basic dynamic load rating | C | 37.1kN |
Basic static load rating | C0 | 23.2kN |
Fatigue load limit | Pu | 0.98kN |
Reference speed | 15000.0r/min | |
Limiting speed | 10000.0r/min | |
Minimum load factor | kr | 0.025 |
Calculation factor | f0 | 14.0 |
Mass
Mass bearing | 0.47kg |
Included products
Snap ring | SP 90 |
Tolerance class
Dimensional tolerances | P6 |
Radial run-out | P6 |