Specifications of SKF Bearing 6203-ZNR
Dimensions
d | 17.0mm | Bore diameter |
D | 40.0mm | Outside diameter |
B | 12.0mm | Width |
d1 | 24.5mm | Shoulder diameter |
D2 | 34.98mm | Recess diameter |
D3 | 38.1mm | Diameter of snap ring groove |
D4 | 44.6mm | Outside diameter of snap ring |
b | 1.35mm | Width of snap ring groove |
C | 2.06mm | Distance outer ring from side face to snap ring groove |
f | 1.12mm | Width of snap ring |
r0 | 0.4mm | Bottom radius of snap ring groove |
r1,2 | 0.6mm | Chamfer dimension |
Abutment dimensions
da | 21.2mm | Diameter of shaft abutment |
da | 24.4mm | Diameter of shaft abutment |
Da | 35.8mm | Diameter of housing abutment |
Db | 46.0mm | Diameter of snap ring recess in the housing |
ba | 1.5mm | Width of snap ring recess in the housing |
Ca | 3.18mm | Distance from outer ring side face to snap ring back face |
ra | 0.6mm | Radius of shaft or housing fillet |
Calculation data
Basic dynamic load rating | C | 9.95kN |
Basic static load rating | C0 | 4.75kN |
Fatigue load limit | Pu | 0.2kN |
Reference speed | 38000.0r/min | |
Limiting speed | 24000.0r/min | |
Minimum load factor | kr | 0.025 |
Calculation factor | f0 | 13.0 |
Mass
Mass bearing | 0.065kg |
Included products
Snap ring | SP 40 |
Tolerance class
Dimensional tolerances | P6 |
Radial run-out | P5 |